Salta al contenuto principale

iPhone 3G Akku tauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Traduzione in corso passo 6

Inglese
Tedesco
Passo 6
iPhone 3G Battery Replacement, Disconnect cable 3: passo 0, immagine 1 di 1
Disconnect cable 3
  • Please note: You may find on some non-American (Chinese, European) versions of the 3G that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screen until it is removed. When you assemble it, you would apply pressure to the ribbon to insert it back into the ribbon "socket."

  • Some iPhones may have the connector colors reversed (black plastic tab, white connector) for connector "3". Make sure you're flipping up the tab properly, otherwise you may damage the connector.

  • Use a spudger to flip up the white plastic tab holding the ribbon cable "3" in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.

  • Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.

Beachte bitte: Bei einigen nicht-amerikanischen Modellen (chinesischen, europäischen) des 3G ist diese Kunststofflasche nicht vorhanden. In diesem Fall schiebst du das Flachbandkabel in Richtung des Screens, bis es sich löst. Beim Wiederzusammenbau übst du Druck auf das Band aus, damit es zurück in die "Fassung" gleitet.

Bei einigen iPhones sind die Farben an Anschluss "3" möglicherweise umgekehrt (schwarze Kunststofflasche, weißer Anschluss). Klappe die Lasche ordnungsgemäß um, da du andernfalls den Anschluss beschädigen könntest.

Klappe die weiße Kunststofflasche um, die das Flachbandkabel "3" an Ort und Stelle hält. Der weiße Anschluss dreht sich um bis zu 90 Grad und das Flachbandkabel wird freigegeben.

Hole das schwarze Flachbandkabel aus seinem Anschluss und entferne die Display-Einheit vom iPhone.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.

OSZAR »