Aggiusta le tue cose Community Store

MacBook Unibody Model A1278 Front Display Glass Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Passo precedente

Traduzione in corso passo 10

Torna alla Guida
Inglese
Italiano
Passo 10
MacBook Unibody Model A1278 Front Display Glass Replacement: passo 0, immagine 1 di 3 MacBook Unibody Model A1278 Front Display Glass Replacement: passo 0, immagine 2 di 3 MacBook Unibody Model A1278 Front Display Glass Replacement: passo 0, immagine 3 di 3

  • During the glass removal process, the AirPort & iSight data cable may stick to the adhesive on the glass panel, disconnecting it from the camera board as the panel is lifted. If your AirPort & iSight data cable is still connected to the camera board, skip this step.

  • If your objective is to remove the camera board, skip this step as reconnecting the AirPort & iSight data cable is not necessary.

  • To reconnect the cable, first use the tip of a spudger to remove the piece of foam tape over the AirPort & iSight data cable ZIF socket.

  • Use the tip of a spudger to flip up the ZIF cable retainer on the AirPort & iSight data cable socket.

  • Insert the AirPort & iSight data cable into its socket on the camera board and use the tip of a spudger to snap down the ZIF cable retainer, locking the cable in place.

  • Reapply the piece of tape covering the AirPort & iSight data cable socket.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.

OSZAR »