MacBook Unibody Model A1342 Logic Board Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Passo precedente

Traduzione in corso passo 14

Torna alla Guida

Inglese

Italiano

Passo 14

MacBook Unibody Model A1342 Logic Board Replacement: passo 0, immagine 1 di 3

MacBook Unibody Model A1342 Logic Board Replacement: passo 0, immagine 2 di 3

MacBook Unibody Model A1342 Logic Board Replacement: passo 0, immagine 3 di 3

Lift the side of the logic board opposite the ports out of the upper case.
Rotate the logic board away from the upper case until the ports clear the lip molded in the upper case.
Pull the logic board and MagSafe board away from the edge of the upper case as one piece.
The MagSafe board may get accidentally disconnected during this process. As a precaution, be sure the MagSafe board connector is securely seated in its socket before lowering the logic board back into the upper case.
Before lowering the logic board back into the upper case, be sure the left speaker and microphone cables are seated in their channels cut into the upper case (as seen in the third picture).

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.

	
		OSZAR »