Modifiche al passo #1
Modifica di Dieter —
Modifica rifiutata da Jake Devincenzi
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Remove the two Phillips #00 screws securing the on/off switch to the front bezel. |
|---|---|
| + | [* red] Remove the two 1.6mm Phillips #00 screws securing the on/off switch to the front bezel. |
| [* icon_note] When replacing, check the protrusion of the switch. There is a small plastic spacer adhered to the inside of button which may come off with cleaning. Without a spacer, the button may not protrude enough to be depressed. If lost, it can be replaced with a suitable thickness of stiff plastic (eg shirt box lid). |