Passo 1 Porta di accesso



• Allenta le due viti a croce Phillips imperdibili che fissano la porta di accesso all'iMac.
• Rimuovi la port di accesso dall'iMac.
• Prima di iniziare la riparazione, scollega il computer e tieni premuto l'interruttore di alimentazione per 20-30 secondi, per scaricare i condensatori interni.
Traduci
4 commenti
Aggiungi un commento
That is a really, really unnecessarily complex way of fitting a new hard drive. Thanks, but no thanks...
annax - 7 gen 2010 Replica
Citazione da annax:
That is a really, really unnecessarily complex way of fitting a new hard drive. Thanks, but no thanks...
annax, if you can suggest a simpler way we're all ears!
Jake Simmonds - 7 gen 2010 Replica
I found this guide to be very useful. The installation was super easy, especially since I've never opened my iMac before. I was able to skip steps 6, 7, 9, 10 and 14. Wish I had one of those long skinny magnetic torx screwdriver's though. I had to use duct tape to hold the screws on the end of the bit for step 12.
I used this opportunity to vacuum out the dust with mini attachments. Much needed after 3 years ;0)
Awesome site!!! Thanks for sharing your knowledge and saving me time and $$$!
Eric Patten - 20 apr 2010 Replica
Yes I did it! thanks for this very good manual
Philippe d Anfray - 19 mag 2010 Replica
Aggiungi Commento
1024
Annulla Pubblica commento

Incorpora questa guida

Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito/forum.

<iframe id="dozuki-embed-885" src="https://it.ifixit.com/Guida/embed/885/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-885"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://it.ifixit.com/Guida/embed/885" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Anteprima